WEBSITE LINKS HERE

                ADVERTISE

IRISH COIN PRICE GUIDE

British Coin Price Guide

Spink Coins
The general sale of Ancient, English and Foreign coins and commemorative Spink Coins

Royal Mint Coins
The Royal Mint's commemorative and Proof coins are available from this website Royal Mint

Sell Your Coins Here
If You Want To Sell Your Coins.Click Here. And Have Look At My List.Sell Your Coins

Coin Books Here
If Looking For a Coin Book Click Here at My World Coin Book .British coin book list Coin Books

Gold Coin Here
< Looking To Buy Gold Coins.And Other CoinsLook Click Here. Gold Coin

Coin Accessories
< Buy All Coin Accessories You Need For Your Coins. Click Here Coin Accessories

World Coins
< Looking For World Coins Click Here Nice List World Coins

Rare Coins
< Looking For Rare Coins Click Here Nice List Rare Coins

Coin Forums
< Looking For Some Nice Coin Forums Click Here Have Look At My List Coin Forums

The copper farthings were produced in 1672-1675 and 1679, weighed 5.2 - 6.4 grams, and had a diameter of 22-23 millimetres. The obverse had a left-facing bust of the king, with the inscription CAROLVS A CAROLO -- Charles, son of Charles -- while the reverse showed the left-facing seated Britannia, with the inscription BRITANNIA and the date in the exergue beneath Britannia. In 1684 and 1685 farthings made of tin with a small central copper plug were produced -- they weighed 5.4 - 6.0 grams and had a diameter of 23-24 millimetres, and had the same inscriptions as the copper farthings. Very few 1685 farthings were produced because the king died on 8 February 1684, in the Old-Style calendar (i.e. when 24 March 1684 would be followed by 25 March 1685, New Years' Day). The tin farthings had an inscription NVMMORVM FAMVLVS -- a subsidiary coinage -- plus the date on the edge rather than on the reverse.

For the reign of king James II, the copper-plugged tin farthings continued to be produced, with examples dated in all years between 1684 and 1687. The obverse had a right-facing bust of the king, with the inscription IACOBVS SECVNDVS -- James the Second -- while the reverse showed the left-facing seated Britannia, with the inscription BRITANNIA, and the inscription NVMMORVM FAMVLVS and the date on the edge of the coin.

Tin farthings continued to be produced for the first few years of the joint reign of William and Mary, being dated 1689-1692, but the coins were rapidly becoming unpopular as the problems of the corrosion of tin became apparent. In 1693 and 1694 copper farthings were produced again, weighing 4.7 - 6.2 grams and with a diameter of 22-25 millimetres. In both issues, the obverse shows the conjoined heads of the co-monarchs, with the inscription GVLIELMVS ET MARIA.

 

In the early years of the reign of King Charles II (1660-1685) there was a clear need for low denomination coins to fund day-to-day purchases, witnessed by the large number of farthing tokens in circulation in the 1660s. The Mint was not ready to produce copper coins using the new machine presses until 1672, when a Royal Proclamation in August 1672 decreed that halfpennies and farthings would be issued, and that they would have a face value equal to the value of the metal less the cost of producing them. The new coins were legal tender up to a total value of six pence, and depicted Britannia (modelled by the Duchess of Richmond) on the reverse. It was soon discovered that the Mint was incapable of producing the copper blanks needed for the new coins, and these eventually were imported from Sweden.

Thanks to the glut of the previous reign, there was no need to produce any copper farthings in the reign of Queen Anne (1701-1714) until the very last year of her reign. If the queen had not died in that year, there is no doubt that the 1714 farthing, weighing 4.8 - 5.8 grams and of 21-22 millimetres diameter, would have entered circulation in quantity, but its actual status is in some doubt as it may be considered a pattern. Sir Isaac Newton was Master of the Mint, and he had high ideals about the quality of the coinage, and the Anne farthing is certainly vastly superior in striking and design to the pieces of William III. The old figure of Britannia used since Charles II's time was discarded in favour of a sharper high relief design in which the bare leg on the former figure of Britannia is covered up, reportedly on the orders of the Queen. Around 1802 a curious rumour swept Britain to the effect that the Queen Anne farthing was worth a fortune, no less than £500, and advertisements appeared in many newspapers offering specimens for sale; in March of 1802 one specimen was sold at auction in London for no less than 750 guineas (£787/10/-).

 

Following the death of Queen Mary in 1694, the production of coins continued under the same contract as before, with farthings of King William III being produced for all years between 1695 and 1700. However it soon became apparent that the manufacturers were economising on expenses -- cheap labour was being used, including foreigners some of whom could not even spell the king's name which they were engraving on the dies. By 1698 there was a glut of copper coinage and an Act was passed to stop the coining for one year; this seems to have had little effect and the proliferation continued. There were further Parliamentary attempts to control the glut of coinage later.

The death of Queen Anne thwarted attempts to issue her farthing, but the need for a copper coinage was no less after the accession of King George I (1714-1727). The price of copper had risen, so the new farthings were lighter than the previous issue, at 4.5 - 5.3 grams. The farthings struck in 1717 and 1718 looked slightly odd as they were smaller, and thicker than the previous issues, with a diameter of 20-21 millimetres, and they are known as dump farthings. Farthings of 1719-1724 are slightly larger, at 22-23 millimetres, but are of the same weight. Unfortunately both issues suffered somewhat from manufacturing problems, as the dies were in bold relief and it was difficult to apply enough pressure to the blanks to make a good impression. The coin features the right-facing head of King George and the inscription GEORGIVS REX on the obverse, and Britannia with the inscription BRITANNIA and the date in the exergue beneath Britannia.

George II's (1727-1760) farthings were minted in quantity in 1730-1737, 1739, 1741, 1744, 1746, 1749, 1750, and 1754 (though the 1754 coin is known to have still been being minted at least until 1763), but to them must be added a huge range of counterfeits (and pieces similar to counterfeits but with markedly different legends from the real coins, so that the manufacturers could avoid accusations of counterfeiting). Many genuine coins were melted down and underweight fabrications produced from the molten metal. The farthings weighed 4.5 - 5.3 grams and had a diameter of 22-23 millimetres. The obverse showed the left-facing head of King George and the inscription GEORGIVS II REX on the obverse, and Britannia with the inscription BRITANNIA and the date in the exergue beneath Britannia.

In the reign of King George III (1760-1820) apart from the "posthumous" George II coins previously mentioned, the first issue of farthings did not come until 1771. Counterfeiting was rampant, and making the production of counterfeit copper coins a felony in 1771 had little effect and for the next twenty years or so the majority of copper so-called coins in circulation were forgeries. Matthew Boulton's contract in 1797 to produce the Cartwheel pennies and twopences, thwarting the counterfeiters, did not extend to producing the farthing, though Boulton had expected that it would and had prepared several patterns of the appropriate size and weight in accordance with his ideas on the intrinsic value of copper coins. However Boulton was given a licence to produce farthings in 1799. In the meantime the price of copper had risen, and consequently the weight of the coins was reduced slightly compared to the cartwheel design, and the 1799 farthing had a more conventional appearance, although two aspects of the coin were far from conventional: the reverse bore the legend 1 FARTHING, the first time the name of a denomination had ever appeared on an English coin, and it was also the first British coin to have the date on the same side as the kings' head. In 1806-1807 a further 22.5 tons of copper was struck into farthings by Boulton, but the price of copper had risen again and the weight was even less than the 1799 issue.

George III farthings were produced in three distinct phases:-

· 1771-1775 (all years). Weight 4.3 - 5.3 grams, diameter 23-24 millimetres. Obverse shows a right-facing bust of the king, with the inscription GEORGIVS III REX, reverse shows a left-facing seated Britannia holding a spray and spear, with the inscription BRITANNIA and the date in the exergue beneath Britannia.

· 1799. Weight 5.8 - 6.6 grams, diameter 23-24 millimetres. Obverse shows a right-facing bust of the king, with the inscription GEORGIVS III DEI GRATIA REX 1799, reverse shows a redesigned left-facing seated Britannia holding a spray and spear, with the inscription BRITANNIA 1 FARTHING.

· 1806-1807. Weight 4.7 - 4.8 grams, diameter 21-22 millimetres. Obverse shows a right-facing bust of the king, with the inscription GEORGIVS III D G REX date, reverse shows a slightly different left-facing seated Britannia holding a spray and spear, with the inscription BRITANNIA.

After the mint moved from the Tower of London to Tower Hill the production of gold and silver coins took precedence over copper in the Great Recoinage of 1816. The production of copper coins did not resume until the reign of King George IV (1820-1830), when farthings were produced in 1821. Benedetto Pistrucci was employed as a designer and engraver at the mint, and unfortunately for the farthing it was his job to engrave the designs for the new coinage, and he produced a spectacularly ugly portrait of the king, with a bulging face and neck. It is not difficult to see why the king was displeased with his portrait, and Pistrucci's treatment of Britannia on the obverse was not much better, with Britannia now facing right for the first time ever. Pistrucci was downgraded for refusing to copy another artist's work, and William Wyon was given the task of producing a better farthing, with the more flattering "bare head" type of 1826; however Wyon did not discard all Pistrucci's ideas, the date still appeared on the obverse, and Britannia still faced right on the reverse. The George IV farthing was produced in two types, between 1821 and 1823, 1825, and 1826 it weighed 4.5 - 4.8 grams, with a diameter of 22 millimetres, and from 1826-1830 it weighed 4.6 - 4.9 grams with a diameter of 22 millimetres. Both Pistrucci's and Wyon's designs were produced in 1826. The Pistrucci obverse shows a left-facing bust of King George IV with the inscription GEORGIUS IIII DEI GRATIA, while the reverse shows a right-facing helmeted Britannia seated to the left of the coin, with a shield and trident, with the inscription BRITANNIAR REX FID DEF and the date in the exergue underneath Britannia. The Wyon obverse shows a left-facing laureated bust of King George IV with the inscription GEORGIUS IV DEI GRATIA date, while the reverse shows a right-facing centrally-seated helmeted Britannia with a shield and trident, with the inscription BRITANNIAR REX FID DEF. Wyon's preference was to put the date under the king's bust, and to put the rose, thistle, and shamrock in the exergue underneath Britannia.

The William IV (1830-1837) farthing, produced in 1831, and 1834-1837, continues the George IV design but with a right-facing bust of the new king, with the inscription GULIELMUS IIII DEI GRATIA date, while the reverse is identical to the previous reigns' Wyon design. The farthings of Queen Victoria's long reign (1837-1901) can be basically divided into the copper issue of 1838-1860, where the coins were 4.5 - 4.9 grams in weight and 22 millimetres in diameter, and which were very similar to the farthings of her two predecessors (with the obvious substitution of REG for REX on the reverse!), and the bronze issue of 1860-1901 (which itself is split between 1894 and 1895 into coins displaying the "young head" and the "old head" of the Queen) (although strangely a copper farthing was produced in 1864 as well as the normal bronze coin: this is extremely valuable). The bronze coins weighed 2.8 - 3.0 grams, were 20 millimetres in diameter, and the metal content was 95% copper, 4% tin, 1% zinc. The bronze coins also featured the denomination FARTHING on the reverse, with the date in the exergue beneath Britannia. The inscription on the obverse of the "young head" coins reads VICTORIA D G BRITT REG F D, while on the "old head" it is VICTORIA DEI GRA BRITT REGINA FID DEF IND IMP. Some 1874-1876 and 1881 farthings have a "H" mintmark underneath the date, indicating that they were produced at the Heaton mint, in Birmingham. Farthings were produced in all years of Victoria's reign except 1837, 1870, 1871, and 1889. From 1897 farthings were issued in an artificially toned state so that they would not be confused with the half-sovereign coin. It is thought that the reason there is an unbroken series of copper farthings between 1838 and 1860 is because the same dies were used to produce the obverses of both the gold sovereign and the farthing -- this would account for the high frequency of defects in the coin series as presumably the dies would have been used first to produce the gold coins, and defects may have appeared in them before they were used on the farthing.

Farthings weighing 2.7 - 2.9 grams and of 20 millimetres diameter (which was to remain the standard size of the coin for the remainder of its existence) were minted in all years of Edward VII 's reign (1901-1910) except 1901. They are similar to the last issues of Queen Victoria except for the king's right-facing bust on the obverse, with the inscription EDWARDVS VII DEI GRA BRITT OMN REX FID DEF IND IMP, and also are extremely reminiscent of the contemporary penny and halfpenny. These farthings were issued in an artificially toned state so that they would not be confused with the half-sovereign coin.

The reign of King George V produced farthings to a basically unchanged design every year between 1911 and 1936. The obverse shows a left-facing portrait of the king by Sir Bertram Mackennal, with the inscription GEORGIVS V DEI GRA BRITT OMN REX FID DEF IND IMP, and the usual right-facing Britannia on the reverse. Unlike some of the pennies of this reign, no farthings have mintmarks from provincial mints. Until 1918 farthings were issued in an artificially toned state so that they would not be confused with the half-sovereign coin, but by the end of the war half-sovereigns were no longer being struck. The content of the bronze used in the farthing was changed in 1923 to 95.5% copper, 3% tin, 1.5% zinc, although the weight of the coin remained 2.8 - 2.9 grams and the diameter was 20 millimetres.

The Edward VIII farthing is a pattern which was awaiting royal approval at the time of the abdication in December 1936. The king insisted that his left profile be used on the coinage instead of the right which would have been used if he had followed the alternating tradition going back to Charles II; the obverse has the inscription EDWARDVS VIII D G BR OMN REX F D IND IMP, but in a complete break from tradition Britannia was dropped from the reverse for the first time since 1672, and replaced by Britain's smallest bird, the Wren. This reverse remained in use for the remainder of the coins' existence.

Farthings of a similar design to his brothers' were produced in each year of the reign of King George VI. The inscription on the obverse reads GEORGIVS VI D G BR OMN REX F D IND IMP until 1948, then GEORGIVS VI D G BR OMN REX FIDEI DEF, but unlike the halfpenny there were no minute differences in the reverse each year.

The farthing of Queen Elizabeth II was only produced in four years, 1953-1956. The reverse was the same as before, while the obverse featured the queen's head by Mary Gillick, with the inscription ELIZABETH II DEI GRA BRITT OMN REGINA F D in 1953, and ELIZABETH II DEI GRATIA REGINA F D for the other three years.

In 1953 a correspondent wrote to The Times that a bus conductor refused to accept eight farthings for a two penny bus fare, and that a newspaper vendor had become abusive when offered six farthings for a newspaper; a subsequent letter pointed out that the farthing was still legal tender in sums up to one shilling, but it was apparent that inflation meant that by 1956 the farthing had outlived its usefulness, and minting ceased after that year. The farthing ceased to be legal tender after 31 December 1960.

But for an infinitesimal correction, the new penny coin that was introduced when decimalisation of British coinage took effect in 1971 is the same size as the most recently-minted farthings.

The British Farthing Coin A Bit of History  


Coin Price Guide

British Farthing

Text Box:  Updated 27/8/2015